Pacific 5TI Hinged Door Set -/60/60 Installation

 

This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.

To see our installation videos please click here.

Installation wall framing requirements

Pacific 5TI Hinged Door Set -/60/60

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-AS-T-1FRR image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-S-M-1FRR image