Installation Instructions

 

This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.

 

Please note:  Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.

For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY 

For hardware from other suppliers, please refer to the individual hardware supplier for information.

 

To see our installation videos please click here.

Installation wall framing requirements

Pacific SPS1 Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS1-AS-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS1-S-M-1 image

Pacific SPS1-FR Hinged Door Set -/60/60

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-AS-T-1FRR image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-S-M-1FRR image

Pacific SPS1-E Hinged Door Set -/90/60

WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-S-M-1FRR image

Pacific SPG2 Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPG2-S-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS1-S-M-1 image

Pacific SPS2 Grille Door Set

WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • 100x75x6 mild steel angle

Fasteners:

  • Jamb fixings at 600mm centres maximum:
  • Expansion anchors eg. M10 Countersunk 'Ramset' Dynabolts.

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • Not applicable
S-D-SPS2-M-1 image

Pacific SPS3 Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS4-5-AS-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • 2mm mild steel EGZ
  • 2mm cold rolled Galvanized steel

Fasteners:

  • Screwbolt anchors through adjustable spacer fixing bracket
  • Jamb fixings at 600mm centres maximum:
  • Masonry screwbolts. The length of bolts MUST be confirmed on site to suit the frame openings formed.

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.
S-D-SPS4-5-S-M-1 image

Pacific SPS4 Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS4-5-AS-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • 2mm mild steel EGZ
  • 2mm cold rolled Galvanized steel

Fasteners:

  • Screwbolt anchors through adjustable spacer fixing bracket
  • Jamb fixings at 600mm centres maximum:
  • Masonry screwbolts. The length of bolts MUST be confirmed on site to suit the frame openings formed.

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.
S-D-SPS4-5-S-M-1 image

Pacific SPS5 Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS4-5-AS-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • 2mm mild steel EGZ
  • 2mm cold rolled Galvanized steel

Fasteners:

  • Screwbolt anchors through adjustable spacer fixing bracket
  • Jamb fixings at 600mm centres maximum:
  • Masonry screwbolts. The length of bolts MUST be confirmed on site to suit the frame openings formed.

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.
S-D-SPS4-5-S-M-1 image

Pacific ARMASHIELD Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-M-1 image

Pacific ARMASHIELD-FR Door Set -/120/-

WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-M-1 image

Pacific 3UE Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-SPS4-5-AS-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • 2mm mild steel EGZ
  • 2mm cold rolled Galvanized steel

Fasteners:

  • Screwbolt anchors through adjustable spacer fixing bracket
  • Jamb fixings at 600mm centres maximum:
  • Masonry screwbolts. The length of bolts MUST be confirmed on site to suit the frame openings formed.

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.
S-D-SPS4-5-S-M-1 image

Pacific 3UE-X Hinged Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 1.6mm
  • Cold rolled galvanized - 1.6mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-3UE-3UEX-AS-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 1.6mm
  • Cold rolled galvanized - 1.6mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-3UE-3UEX-AS-M-1 image

Pacific 5TI Hinged Door Set -/60/60

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-AS-T-1FRR image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm

Insulation rating:

To obtain an insulation rating, the steel frame must be packed with either;

  • Plasterboard (30 minutes)
  • Ceramic fibre blanket (30 minutes)
  • Grout (60 minutes)

No frame packing equals no insulation rating (i.e. -/xx/-)

S-D-SPS1-S-M-1FRR image

Pacific 5TE Hinged Door Set -/120/-

WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-M-1 image

Pacific 6ST Hinged Door Set -/120/-

WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-M-1 image

Pacific SPW-1 Security Window

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • M12 Screwbolt anchors through adjustable spacer fixing bracket. Fixings at 600mm centres nominal. The length of bolts MUST be confirmed on site to suit the frame openings formed.
  • Bead - Tamper-resistant fixing screws or rivets at 400mm centres.

Stud size:

  • Ex 100 x 50 minimum

Wedging gap:

  • 0-10mm
S-W-SPW1-S-T image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • M12 Screwbolt anchors through adjustable spacer fixing bracket. Fixings at 600mm centres nominal. The length of bolts MUST be confirmed on site to suit the frame openings formed.
  • Bead - Tamper-resistant fixing screws or rivets at 400mm centres nominal.

Wedging gap:

  • 0-10mm
S-W-SPW1-S-M image

Pacific ARMASHIELD Ballistic Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-M-1 image

Pacific ARMASHIELD Blast Door Set

WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-T-1 image
WALL TYPE: Masonry
FRAME TYPE: Steel, 1-part

Frame materials available:

  • EGZ - 2.0mm
  • Cold rolled galvanized - 2.0mm

Fasteners:

  • Jamb fixings at 600mm centres nominal
  • Expansion anchors eg. M10 countersunk 'Ramset' Dynabolts
  • M12 countersunk masonry screwbolts (through adjustable spacer fixing bracket)

Head Fixing (minimum):

  • Single door - none required.
  • Paired door - single central fastener required.

Wedging Gap:

  • 0-10mm
S-D-ARMASHIELD-S-M-1 image