Pacific SPS3 Hinged Door Set
The Pacific SPS3 Reinforced Security door set is suitable for commercial interiors where resistance to physical attack is required from a door with the appearance of a standard interior door.
The SPS3 includes a reinforced door leaf typically hung in a steel frame, and finished with a variety of facings including timber veneers.
Most common applications include:
- Protection of staff or property
- Commercial environments
Not suitable for protection against sophisticated forced entry.
The door set is suitable for both interior and exterior use.
|Bullet Resistance||S0||AS/NZ 2343||Shotgun 12 gauge SG shot|
The thickness of the SPS3 door leaf is 50mm with an approximate leaf weight of 60kg/m2
|Wall Type||Fire Resistance Rating (FRR)||Door Application||Max Leaf
- Please note that the maximum leaf width shown above is measured per door leaf.
- Doors can be manufactured to any practical size, please contact Pacific Doors.
The SPS3 door set has been successfully tested to AS/NZS 2343:1997 “Bullet-resistant panels and elements” with a rating of S0.
Stainless steel button tipped Ball Bearing hinges 4 per leaf. Full mortise installation.
The SPS3 door set is suitable for installation of any security or architectural hardware. Hardware must be specified at time of order to enable correct preparation
Available options include:
- Standard paint-quality MDF facings
- Plastic laminate (e.g. Formica)
- Vinyl/acrylic (e.g. Acrovyn, Kydex)
- Timber veneer
The leaf edges listed below are available for the SPS3 door set
Frame Types & Profiles
This door set is only available in a steel frame.
The steel frame profiles listed below are available for the SPS3 door set
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
The meeting stiles listed below are applicable to paired door sets only.
Product Optional Extras
|Glazing Type||Maximum Glazed Area||Max Height (mm)||Max Width (mm)||Glazing Bead|
|Per VP||Total||Steel Bead|
The standard glazing system provides a flush attack face and steel beading with fixings on the “non-attack” face. Glazing with ballistic rating G2 is available.
Standard Vision Panel Cross Sections
Sidelights and Overlights
Secure sidelights and overlights are available for this door set. Please contact Pacific Doors to discuss your project requirements.
Secure overpanels are available for this door set. Please contact Pacific Doors to discuss your project requirements.
Additional Door Options
Push or Kickplates
Kickplates are not generally required on this door set.
Optional, stainless steel mesh inserted into the door core and faced each side with louvre grilles (maximum 200x200mm). Not available for smoke control.
This door leaf has a thermal insulation rating (R-value) of 0.502 Km2/W.