Leaf Sizes: The PPSD is available for manufacture to any practical size to suit client requirements, in either a single or paired door configuration.
Leaf Thickness: 50mm thick
Weight: 75-100 kg/m2 depending on the hardware and infill panels.
Glazing: Security glazing up to 22mm thick is suitable for use in the PPSD door set.
Finish: Standard preparation for interior use is powder coated. Standard preparation for exterior use is sandblasting followed by zinc arc spray to the frame then either priming or powder coating. Other finishes, or a paint quality door set are available upon request
Exterior: The PPSD is tested to AS/NZ 4284:2008 - "Testing of building facades" and complies with the requirements of NZS 4211:2008 - "Specification for performance of windows" up to and including the high wind zone.
Wall Types
The PPSD is suitable for installation in timber stud, steel stud and masonry walls.
The standard installation method for steel or timber stud walls is by 12g screws at max. 450mm centres.
The standard for masonry installation is M8 Excalibur screwbolts (or similar) at max. 450mm centres.
No fasteners are exposed to weather or the attack face.
