Pacific VP60HR Door Set

Timber-framed smoke control doors include a seal in the frame. Steel framed doors may include the PFS-4 seal. If required, bottom seals can be selected from the Hardware List.

The thickness of the VP60HR door leaf is 48-60mmwith an approximate leaf weight of at least 27kg/m2

Notes:

1. Please note that the maximum leaf width shown above is measured per door leaf.
2. The ‘sm’ above denotes that the door is available as a smoke control door set.
3. Insulation ratings must be notified at time of pricing for steel frames.
4. Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.

Wall Types

Jambs may be connected to timber stud, steel stud or concrete masonry.
The minimum specification for each wall type is:

• Precast concrete (100mm thickness) or grouted blockwork (minimum 140mm thickness).
• Non-load bearing timber stud partitions of minimum specifications GBT60a or GBT60b (Gib^® Fire Rated Systems). Note that steel framed VP60 door sets may only be installed in walls of minimum stud size ex 100x50mm.
• Non-load bearing steel stud partitions of minimum specification GBS90 (timber framed doors) or GBS60 (Steel framed doors) (Gib^® Fire Rated Systems).
• Universal Wall systems GBUW60a or GBUW60b.

Leaf Facings

Notes:

1. Of the above facings only those marked * may extend around the door edge.
2. Steel frames are required where metal capping is used.
3. Timber veneer requires FRR -/60/60 and is only available in timber frame or grouted steel frame
4. Standard Paint Quality doors are allowed ‘non-clashed’ to provide best surface for finish painting.
5. Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

Leaf edges are available in the below profiles

Paint quality doors are non-clashed as standard.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

Note:

1. Of the above meeting stiles, Rebated Ali Capped is the only meeting stile available for doors thicker than 50mm

Notes:

1. Please note that the height and width of the vision panel must still fall within the maximum glazed area.
2. A maximum of two vision panels are permitted per leaf.
3. Glazing types marked with * indicate Grade A Safety glass.
4. Pyrobel is not suitable for exterior doors.

For 60 minute door sets with larger vision panel options, please refer to the VP60

Standard Vision Panel Cross Sections

Timber Bead*	Aluminium Bead
*Pyrobel only	Not applicable for this door set.