Pacific AFD300 Acoustic Fire Door Set STC/Rw 40

Hinged

The AFD300 is a hinged single or pair leaf flush panel door leaf hung in a timber frame. It includes frame-mounted perimeter seals and an automatic bottom seal. It's intended for interior installation only.

Product features:

STC 40 acoustic rating
60min fire rating
Single or pair
Optional vision panel
4 frame options
Suitable for interior use only
Compatible with timber stud and masonry wall
Certified acoustic performance to ISO 140-3
Meets NZS4520.2010 standard

Product Options

The thickness of the AFD300 door leaf is 47mm with an approximate leaf weight of 26kg/m2

The AFD300 with its composite construction to achieve fire and acoustic performance will not exhibit a perfectly straight or flat surface. It may have undulations in the door face of +/- 10mm.

Wall Type	Fire Resistance Rating Stability/Integrity/Insulation	Door Application	STC/Rw Rating	Max Leaf Height (mm)	Max Leaf Width (mm)
Timber Stud Wall Masonry Wall	-/60/60sm	Single	40	2400	1200
Timber Stud Wall Masonry Wall	-/60/60sm	Pair	38	2100	910

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.
The ‘sm’ above denotes that the door is available as a smoke control door set.
Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.

Wall Types

The AFD300 is approved for installation in the following wall systems:

GBT60a
GBTL60b
GBT(L)A 60
GBT(L)A 60r
GBT(L)IC 60
GBT(L)IC 60a
GBT(L)A 30a
GBT(L)A 30b
GBT(L)A 45r
GBT(L)IC 45
Masonry block, 140 mm
Masonry block, 190 mm

Please note that for wall systems with a FRR of less than 60 minutes, the fire rating of the doorset will be limited to the rating of the wall system.

Leaf Facings

The facings listed below are available for the AFD300 door set

MDF
Timber Veneer

Notes:

Of the above facings only those marked * may extend around the door edge.
Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

All doors are clashed on the vertical edges with solid timber.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

Hardware

A range of common commercial hardware has been fire tested with the AFD300 door set.

Hardware can be fixed to the door using standard fasteners. The door leaf does not have a solid core so fixing is into the door facings (11mm thick).

Pull handles and door holders must be through-fastened.

Concealed hinges are not an option on this doorset.

Seals

The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed. Frame seals should be undamaged and continuous along all sides of the frame.

The bottom seal is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door. Drop seals are supplied fully retracted so as to minimise the chance of damage during transport and installation. After the doorset has been installed, the drop seal should have its throw adjusted to ensure the seal engages fully on the floor along its full width. The drop seal rubber should be long enough to touch the jambs on both sides. This means the seal will project beyond the edge of the leaf.

The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.

Timber Frame

The timber frame profiles listed below are available for the AFD300 door set. Frame material is hardwood of minimum density 650 kg/m3.

Steel Frame

The AFD300 is currently not available in a steel frame.

Standard frames are three-sided only with no sill. Timber sills are not available on fire doorsets. For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Glazing Type	Maximum Glazed Area		Max Height (mm)	Max Width (mm)	STC/Rw Rating	Glazing Bead		FRR with Vision Panel
	Per VP	Total				Timber	Aluminium	Up to 0.065m2	Over 0.065m2
Pyrobel	0.16m2	0.32m2	660	400	40	√	√	-/60/60	-/60/30

Notes:

Please note that the height and width of the vision panel must still fall within the maximum glazed area.
Maximum glazed area is measured per door leaf.