Pacific AD400 Acoustic Door Set STC/Rw 43

Hinged

The AD400 is a hinged flush panel door that is suitable for interior use, available as a single door or as a pair of doors, acoustic tested and designed to reduce sound transmission within buildings.

Product features:

STC 43 acoustic rating
Single or pair
4 leaf facing options
2 glass options
9 frame options
Suitable for interior use only
Compatible with timber stud, steel stud and masonry wall
Certified acoustic performance to ISO 140-3

Product Options

The thickness of the AD400 door leaf is 47mm with an approximate leaf weight of 35kg/m2

Wall Type

Acoustic Rating

Door Application

Max Leaf
Height (mm)

Max Leaf
Width (mm)

Steel Stud Wall
Timber Stud Wall
Masonry Wall

STC/Rw 43

Single

2700

1200

Pair

2700

1200

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.

Wall Types

Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.

Leaf Facings

The facings listed below are available for the AD400 door set

MDF
Timber Veneer
HPL decorative laminate (e.g. Formica)
Sheet Vinyl

Notes:

Of the above facings only those marked * may extend around the door edge.
Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

Paint-quality doors have unclashed edges.

Timber veneer faced doors are clashed on the vertical edges with solid timber.

Doors faced with decorative laminate or vinyl (e.g. Hospital doors) are capped on the vertical edges with an aluminium extrusion capping with natural anodised finish.

Meeting Stiles

The meeting stiles listed below are applicable to pair door sets only.

Hardware

The AD400 requires suitable latching in order for the frame seals to fully seal the gap between door leaf and frame.

Practically any standard door hardware can be used on the AD400, however the proposed hardware must be advised to Pacific Door Systems Ltd to assess the suitability, before manufacture.

Any penetrations through the leaf should be packed with acoustic materials (e.g. batts) wherever possible.

Concealed hinges are not an option on this doorset.

Recommended latching points are shown in the below diagram. Pair doorsets require a designated inactive leaf which is secured top and bottom.

Seals

Frame seals

The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed.

Bottom seals

There are two options for the bottom seals:

Threshold Seal (Type T)

Compression Seal (Type B)

An aluminium threshold (natural anodised finish) with integral seal is fitted to the floor. In this case there is no seal required in the bottom edge of the door leaf. The height of the gap between the finished floor level and the bottom of the door must be set up carefully during installation of the door set so that the door will engage with the threshold seal as intended.

A neoprene seal on the bottom edge of the door leaf engages with a stainless steel threshold plate fitted to the floor.

Timber Frame

The timber frame profiles listed below are available for the AD400 door set

Steel Frame

The steel frame profiles listed below are available for the AD400 door set

Steel frames require packing of the frame during installation with fibrous insulation material (e.g. fibreglass, mineral wool or polyester batts).

For more in depth information on frame profiles and sizes, please see our Installation Instructions.

The AD400 can be supplied with a vision panel of maximum height 1000mm.

Glazing Type	Maximum Glazed Area	Max Height (mm)	Max Width (mm)	Glazing Bead		STC/Rw Rating
Glazing Type	Maximum Glazed Area	Max Height (mm)	Max Width (mm)	Timber	Aluminum	STC/Rw Rating
Soundstop	0.16m2	1000	860	√	√	43
Soundstop	0.45m2	1000	860	√	√	38

Notes:

Please note that the height and width of the vision panel must still fall within the maximum glazed area.
Ratings apply to a single vision panel per leaf.
Maximum glazed area is measured per door leaf.

Circular Vision Panels

Size allowance	Standard Cross Section

Pacific AD400 Acoustic Door Set STC/Rw 43

Product Options

Leaf Size and Wall Type

Wall Types

Door Leaf Options

Leaf Facings

Leaf Edges

Meeting Stiles

Hardware and Seals

Hardware

Seals

Frame seals

Bottom seals

Threshold Seal (Type T)

Compression Seal (Type B)

Frame Types & Profiles

Timber Frame

Steel Frame

Vision Panel

Circular Vision Panels

Standard Vision Panel Cross Sections

Timber Bead

Aluminium Bead

Performance

Acoustical Performance Graphs

Download

Installation Instruction

Product Optional Extras

Additional Door Options

Push or Kickplates

Overpanel

Sidelight & Overlight

Pacific AD400 Acoustic Door Set STC/Rw 43

Cookie consent

Product Options

Leaf Size and Wall Type

Door Leaf Options

Hardware and Seals

Frame Types & Profiles

Vision Panel

Performance

Acoustical Performance Graphs

Download

Installation Instruction

Product Optional Extras

Additional Door Options

Overpanel

Sidelight & Overlight