Pacific AD300 Acoustic Door Set STC/Rw 40

Hinged

The AD300 is a hinged flush panel door that is suitable for interior use, available as a single door or as a pair of doors, acoustic tested and designed to reduce sound transmission within buildings. The AD300 can also be supplied as a Hospital door with features suited to that application.

Product features:

STC 40 acoustic rating
Single or pair
4 leaf facing options
9 frame options
2 glass options
Suitable for interior use only
Compatible with timber stud, steel stud and masonry wall
Certified acoustic performance to ISO 140-3

Product Options

The thickness of the AD300 door leaf is 47mm with an approximate leaf weight of 35kg/m2

Wall Type

Acoustic Rating

Door Application

Max Leaf
Height (mm)

Max Leaf
Width (mm)

Steel Stud Wall
Timber Stud Wall
Masonry Wall

STC/Rw 40

Single

2700

1200

Pair

2700

1200

Notes:

Please note that the maximum leaf width shown above is measured per door leaf.

Wall Types

Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.

Leaf Facings

The facings listed below are available for the AD300 door set

MDF
Timber Veneer
HPL decorative laminate (e.g. Formica)
Sheet Vinyl

Notes:

Of the above facings only those marked * may extend around the door edge.
Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

Paint quality doors have unclashed edges.

Timber veneer faced doors are clashed on the vertical edges with solid timber.

Doors faced with decorative laminate or vinyl (e.g. Hospital doors) are capped on the vertical edges with an aluminium extrusion capping with natural anodised finish.

Meeting Stiles

The meeting stiles listed below are applicable to pair door sets only.

Hardware

The AD300 requires suitable latching in order for the frame seals to fully seal the gap between door leaf and frame.

Practically any standard door hardware can be used on the AD300, however the proposed hardware must be advised to Pacific Door Systems Ltd to assess the suitability, before manufacture.

Any penetrations through the leaf should be packed with acoustic materials (e.g. batts) wherever possible.

Concealed hinges are not an option on this doorset.

Recommended latching points are shown in the below diagram. Pair doorsets require a designated inactive leaf which is secured top and bottom.

Seals

The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed. Frame seals should be undamaged and continuous along all sides of the frame.

The bottom seal (Type L) is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door.

Drop seals are supplied fully retracted so as to minimise the chance of damage during transport and installation. After the doorset has been installed, the drop seal should have its throw adjusted to ensure the seal engages fully on the floor along its full width. The drop seal rubber should be long enough to touch the jambs on both sides. This means the seal will project beyond the edge of the leaf.

The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.

Timber Frame

The timber frame profiles listed below are available for the AD300 door set

Steel Frame

The steel frame profiles listed below are available for the AD300 door set

Steel frames require packing of the frame during installation with fibrous insulation material (e.g. fibreglass, mineral wool or polyester batts).

Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. For more in depth information on frame profiles and sizes, please see our Installation Instructions.

The AD300 can be supplied with a vision panel of maximum height 1000mm.

Glazing Type	Maximum Glazed Area	Max Height (mm)	Max Width (mm)	Glazing Bead		STC/Rw Rating
Glazing Type	Maximum Glazed Area	Max Height (mm)	Max Width (mm)	Timber	Aluminum	STC/Rw Rating
Soundstop	0.16m2	1000	860	√	√	40
Soundstop	0.45m2	1000	860	√	√	38

Notes:

Please note that the height and width of the vision panel must still fall within the maximum glazed area.
Ratings apply to a single vision panel per leaf.
Maximum glazed area is measured per door leaf.

Circular Vision Panels

Size allowance	Standard Cross Section

Pacific AD300 Acoustic Door Set STC/Rw 40

Product Options

Leaf Size and Wall Type

Wall Types

Door Leaf Options

Leaf Facings

Leaf Edges

Meeting Stiles

Hardware and Seals

Hardware

Seals

Frame Types & Profiles

Timber Frame

Steel Frame

Vision Panel

Circular Vision Panels

Standard Vision Panel Cross Sections

Timber Bead

Aluminium Bead

Performance

Acoustical Performance Graphs

Download

Installation Instruction

Product Optional Extras

Additional Door Options

Push or Kickplates

Overpanel

Sidelight & Overlight

Pacific AD300 Acoustic Door Set STC/Rw 40

Cookie consent

Product Options

Leaf Size and Wall Type

Door Leaf Options

Hardware and Seals

Frame Types & Profiles

Vision Panel

Performance

Acoustical Performance Graphs

Download

Installation Instruction

Product Optional Extras

Additional Door Options

Overpanel

Sidelight & Overlight