Pacific AD100 Acoustic Door Set STC/Rw 35
The AD100 is a lightweight, low cost alternative with improved performance compared to standard doors fitted with proprietary seals and available as a single and pair door. This door is tested acoustic door set designed to reduce sound transmission within buildings.
Product features:
- STC 35 acoustic rating
- Single or pair
- 9 frame options
- Optional vision panel
- Suitable for interior use only
- Compatible with timber stud, steel stud and masonry wall
- Certified acoustic performance to ISO 140-3
Cookie consent
This video is hosted by YouTube. By showing the external content you accept the terms and conditions of www.youtube.com.
*Your choice will be saved in a cookie until you have closed your browser.
Product Options
The thickness of the AD100 door leaf is 43mm with an approximate leaf weight of 17kg/m2.
|
Wall Type | Acoustic Rating | Door Application | Max Leaf Height (mm) | Max Leaf Width (mm) |
| Steel Stud Wall Timber Stud Wall Masonry Wall | STC/Rw 35 | Single | 2700 | 1200 |
| Pair | 2700 | 1200 |
Notes:
- Please note that the maximum leaf width shown above is measured per door leaf.
Wall Types
Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.
Leaf Facings
The facings listed below are available for the AD100 door set
- MDF
- Timber Veneer
Notes:
- Of the above facings only those marked * may extend around the door edge.
- Other facings may be available, please contact Pacific Doors to discuss further options.
Leaf Edges
Paint quality doors have unclashed edges.
Timber veneer faced doors are clashed on the vertical edges with solid timber.
Meeting Stiles
The meeting stiles listed below are applicable to paired door sets only.
Hardware
The AD100 requires suitable latching in order for the frame seals to fully seal the gap between door leaf and frame.
Practically any standard door hardware can be used on the AD100, however the proposed hardware must be advised to Pacific Door Systems Ltd to assess the suitability, before manufacture.
Any penetrations through the leaf should be packed with acoustic materials (e.g. batts) wherever possible.
Concealed hinges are not an option on this doorset.
Recommended latching points are shown in the below diagram. Pair doorsets require a designated inactive leaf which is secured top and bottom.
Seals
The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed. Frame seals should be undamaged and continuous along all sides of the frame.
The bottom seal (Type L) is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door.
Drop seals are supplied fully retracted so as to minimise the chance of damage during transport and installation. After the doorset has been installed, the drop seal should have its throw adjusted to ensure the seal engages fully on the floor along its full width. The drop seal rubber should be long enough to touch the jambs on both sides. This means the seal will project beyond the edge of the leaf.
The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.
Timber Frame
The timber frame profiles listed below are available for the AD100 door set
Steel Frame
The steel frame profiles listed below are available for the AD100 door set
Steel frames require packing of the frame during installation with fibrous insulation material (e.g. fibreglass, mineral wool or polyester batts).
Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. For more in depth information on frame profiles and sizes, please see our Installation Instructions.
| Glazing Type | Maximum Glazed Area | Max Height (mm) | Max Width (mm) | Glazing Bead | STC/Rw Rating | |
| Timber | Aluminum | |||||
| 6.38 Clear Lam | 0.45m2 | 1000 | 860 | √ | √ | 35 |
Notes:
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- Ratings apply to a single vision panel per leaf.
- Maximum glazed area is measured per door leaf.
Circular Vision Panels
| Size allowance | Standard Cross Section |
 |  |
Standard Vision Panel Cross Sections
| Timber Bead | Aluminium Bead |
 |  |
Smoke control
AD-series acoustic doors are available with a smoke control rating (-/-/-/ SM). These doors comply with the NZBC C/AS2 C6.1.2 definition of smoke control doors.
Thermal insulation
This door leaf has a thermal insulation rating (R-value) of 0.739 Km2/W.
Product Optional Extras
Push or Kickplates
Kickplates of any kind can be surface mounted to this door set.
Overpanels are not an option on this door set as it would impact the acoustic performance of the door set.
Timber framed AD-series acoustic doors can be combined with our SPA-series acoustic windows to form a doorset and sidelight combination. Door and window supplied in separate frames to be joined on site by the installer. Separate acoustic tags will be issued. Overall acoustic performance limited to that of the lowest rated unit.
There is no steel framed door / sidelight combination available.
This door is made from the following materials (datasheets available on request):
| Component material | % by volume |
| MDF (formaldehyde emissions rating E0) | 41 % |
| Polyester fibre acoustic blanket | 57 % |
| PVA adhesive | 1 % |
| Solid timber from FSC certified supplier | 1 % |