Pacific X-Ray Barrier Window Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Please note: Hardware is not included with our doors. However, we are pleased to help in sourcing high-quality hardware from ASSA ABLOY at an additional cost.
For BPIR Documents related to ASSA ABLOY hardware, please see: ASSA ABLOY
For hardware from other suppliers, please refer to the individual hardware supplier for information.
Installation wall framing requirements
Pacific X-Ray Barrier Window
WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
Fasteners:
- Frame to be screw fixed (10g x 75mm self tapping) at 600mm nominal centres. Two fasteners per location.
Stud size:
- Ex 100 x 50 minimum
Wedging gap:
- N/A
WALL TYPE: Timber stud
FRAME TYPE: Steel, 1-part
Frame materials available:
- EGZ - 1.6mm
- Cold rolled galvanized - 1.6mm
Fasteners:
- Frame to be screw fixed (10g x 75mm self tapping) at 600mm nominal centres. Two fasteners per location.
Stud size:
- Ex 100 x 50 minimum
Wedging gap:
- N/A
