Pacific PFL60 Fuego-Light Steel Glazed Fire Door Set -/60/30sm
The Pacific Forster FuegoLight -/60/30 is a high visibility fire door set. It comprises a side hung, fully glazed single or pair leaf. The leaf is hung on seam welded steel hinges in a steel frame.
The thickness of the door leaf is 65 mm with an approximate leaf weight of 76 kg/m2
|Wall Type||Fire Resistance Rating
|Door Application||Max Leaf
| Steel Stud Wall
Timber Stud Wall
- Please note that the maximum leaf width shown above is measured per door leaf.
- The ‘sm’ above denotes that the door is available as a smoke control door set.
This steel fire doorset is fully glazed and not available with any other facings.
Standard preparation for interior use is powder coating.
Standard preparation for exterior use is sandblasting followed by zinc arc spray (15 year weatherability grade) to leaf and frame.
Unit can be delivered with a powder coat finish or primed ready to paint.
The door set is tested to AS/NZS 4284:2008 – “Testing of building facades” and complies with requirements of NZS 4211:2008 – “Specification for performance of windows” up to and including the High Wind Zone.
This door set uses standard Forster lock and handles only. The Forster lock fits any standard europrofile lock cylinder. No other latching hardware is approved on this door set.
Dorma TS93B SG5-7 closer mounted on either face.
For pair door sets closers have to be mounted on the pull side of the leaves.
The leaf is hung on two seam welded steel hinges.
The Effeff 143 (fail secure) electric strike is approved for use on this door.
Frame Types & Profiles
The leaf is hung in a frame of 1.5 mm cold formed steel box sections.
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
This door set is available with rebated meeting stiles only. This is only applicable to pair door sets.
The Pacific steel fire door set -/60/30 is suitable for installation in timber stud, steel stud and masonry walls.
The standard installation method for steel or timber stud walls is by 12g screws at max. 450 mm centres.
The standard for Masonry installation is M8 Excalibur screwbolts (or similar) at max. 450 mm centres. No fasteners are exposed to weather or attack face.
Product Optional Extras
|Glazing Type||Maximum Glazed Area||Max Height (mm)||Max Width (mm)||Glazing Bead||FRR|
|Pyrobel 16||2.416 m2||2366||1021||√||-/60/30|
- Sizes noted above are the clear view.
Single Leaf Door Sets
Sidelights and Overlights
Sidelights with a clear view width of up to 1376 mm can be added to either side of the leaf.
One overlight can be added above the leaf. The overall height of the unit is limited to 4259 mm for interior doorsets and 3993 mm for exterior doorsets.
SIDELIGHTS AND OVERLIGHTS
Additional Door Options
Push or Kickplates
Push or Kickplates are not available on this door set.
Ventilation grilles are not available on this door set.
Technical Compliance Statement
The Pacific Forster FuegoLight -/60/30 fire door complies with the requirements of NZS 4520 Fire-resistant door sets when installed in accordance with Pacific Doors’ Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.
NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)
Pacific Forster FuegoLight -/60/30 fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.
The fire resistance achieved by the Pacific Forster FuegoLight -/60/30 was FRR -/60/30
The Pacific Forster FuegoLight -/60/30 has been tested to and met the physical endurance requirements of NZS 4520 Appendix A.
The Pacific Forster FuegoLight -/60/30 fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Pacific Doors, or specific contractual guarantees, whichever are overriding.