Pacific SPS1-FR Hinged Door Set -/60/60

 

The Pacific SPS1-FR door set is a detention or commercial security fire door, resistant to physical attack using hand tools, levers and heavy impacts from either face. The door leaf is a solid core panel, fully encapsulated in steel sheet with seam-welded edges, hung in a steel frame.

Most common applications include:

  • Prison Fire Door
  • Police Station Cell Door
  • Commercial Security Fire door
  • Stairwell door in multi-level buildings

The door set is suitable for both interior and exterior use.

  Rating Standard Description
Fire Resistance FRR -/60/60 (sm) AS1530.4  
Bullet Resistance G1 AS/NZ 2343 .357 Magnum
So AS/NZ 2343 Shotgun 12 gauge SG shot

The thickness of the SPS1-FR door leaf is 50mm with an approximate leaf weight of 59kg/m2

Wall Type Fire Resistance Rating (FRR) Door Application Max Leaf
Height (mm)
Max Leaf
Width (mm)
Timber Stud
Masonry
-/60/60 (sm) Single 2150 1000
Pair 2150 1000

Notes:

  1. Please note that the maximum leaf width shown above is measured per door leaf.
  2. The ‘sm’ above denotes that the door is available as a smoke control door set.

Security Testing

The SPS1 door set was subjected to 50 impacts from a 200kg cement-filled bag at 4.8m/s, in the direction of opening of the door. The door was able to be opened at the end of the test and was substantially undamaged.

Ballistic Testing

The SPS1-FR door set has been successfully tested to AS 2343:1984 “Bullet-resistant panels for interior use” with ratings of:

  • G1 .357 Magnum
  • S0 Shotgun 12 gauge SG shot

Hardware

Hinges

Full mortise 4½” x 4½“ Institutional Hinges are standard (material is Stainless Steel 304).

Locks and Accessories

The SPS1-FR may be fitted with a range of security hardware, including locks with steel or brass components, any closers, pull handles and minor items of hardware provided they are non-combustible and fixed with steel fasteners. Note that fitting of deadlocks and other non-self-latching hardware will make the door set non-compliant in respect to the standard NZS 4520 Fire-resistant door sets.

Product Options

Leaf Facings

The SPS1-FR is fully encapsulated in steel sheet.

Leaf Edges

The SPS1-FR has seam welded edges as shown below.

Frame Types & Profiles

Timber Frame

This door set is only available in a steel frame.

Steel Frame

The steel frame profiles listed below are available for the SPS1 door set

 

For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

The fire rated pair door set requires particular latching arrangements for compliance. The square meeting stile requires steel flushbolts to the top and bottom of the inactive leaf as well as a steel mortice latch at the centre.

A rebated meeting stile is available upon request. Please contact Pacific Doors to discuss your requirements.

 

Wall Types

The SPS1 fire rated door set can be installed into concrete and masonry walls, timber stud walls, or walls including RHS steel posts.

The tested timber stud wall is a Gib® GBT 60a wall and optionally may include a 2mm steel sheet lining for additional security.

For details of RHS post walls contact Pacific Door Systems Ltd.

Product Optional Extras

Vision Panels

Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR with Vision Panel
Per VP Total Steel Bead Up to 0.065m2 Over 0.065m2
Firelam 0.091m2 0.182m2 700 700   -/60/60 -/60/-

Notes:                 

  1. Please note that the height and width of the vision panel must still fall within the maximum glazed area.

Standard Vision Panel Cross Sections

Steel Bead

Sidelights and Overlights

Sidelights and overlights are not available for this door set. Please contact Pacific Doors to discuss your project requirements.

Overpanels

Secure overpanels are are not available for this door set. Please contact Pacific Doors to discuss your project requirements.

Additional Door Options

Push or Kickplates

Kickplates are not generally required on this door set.

 

Ventilation Grilles

Ventilation grilles are not applicable for this door set.

Technical Compliance Statement

The SPS1-FR fire door complies with the requirements of NZS 4520 Fire-resistant door sets when installed in accordance with Pacific Doors’ Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.

NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)

Pacific SPS1-FR fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.

The fire resistance achieved by the SPS1-FR was FRR -/60/60

The SPS1-FR fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Pacific Doors, or specific contractual guarantees, whichever are overriding.

Security testing was conducted by Opus Central Laboratories Report 98-527903.66 "Intruder Resistance Tests on Three door sets from Pacific Door Systems Ltd".

The SPS1-FR door set has been successfully tested to AS 2343:1984 “Bullet-resistant panels for interior use” with ratings of:

  • G1 .357 Magnum
  • S0 Shotgun 12 gauge SG shot