Pacific AD200-I Acoustic Door Set STC/Rw 38
The AD200 is a tested acoustic door set designed to reduce sound transmission within buildings.
The AD200 is a hinged flush panel door that is suitable for interior use. It is available as a single door or as a pair of doors.
The AD200 can be supplied as a Hospital door with features suited to that application.
An exterior version of the AD200 is also available – refer to the AD200-E
The thickness of the AD200 door leaf is 47mm with an approximate leaf weight of 24kg/m2
|Wall Type||Acoustic Rating||Door Application||Max Leaf
|Steel Stud Wall
Timber Stud Wall
- Please note that the maximum leaf width shown above is measured per door leaf.
The perimeter frame seals are self-adhesive seals mounted in the frame rebate, so are hidden when the door is closed.
The bottom seal (Type L) is an automatic door seal that lifts clear of the floor when the door is opened. The seal is fully mortised in a groove in the bottom edge of the door.
The bottom seal must close onto a smooth, flat and level surface in order to seal as intended.
The AD200 requires suitable latching in order for the frame seals to fully seal the gap between door leaf and frame.
Practically any standard door hardware can be used on the AD200, however the proposed hardware must be advised to Pacific Door Systems Ltd to assess the suitability, before manufacture.
Any penetrations through the leaf should be packed with acoustic materials (e.g. batts) wherever possible.
The facings listed below are available for the AD200 door set
- Timber Veneer
- HPL decorative laminate (e.g. Formica)
- Sheet Vinyl
- Of the above facings only those marked * may extend around the door edge.
- Other facings may be available, please contact Pacific Doors to discuss further options.
Paint quality doors have unclashed edges.
Timber veneer faced doors are clashed on the vertical edges with solid timber.
Doors faced with decorative laminate or vinyl (e.g. Hospital doors) are capped on the vertical edges with an aluminium extrusion capping with natural anodised finish.
Frame Types & Profiles
The timber frame profiles listed below are available for the AD200 door set
The steel frame profiles listed below are available for the AD200 door set
Steel frames require packing of the frame during installation with fibrous insulation material (e.g. fibreglass, mineral wool or polyester batts).
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
The meeting stiles listed below are applicable to paired door sets only.
Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.
Product Optional Extras
The AD200-I can be supplied with a vision panel of maximum height 1000mm.
|Glazing Type||Maximum Glazed Area||Max Height (mm)||Max Width (mm)||Glazing Bead||STC/Rw Rating|
|10.38 Clear Lam||0.16m2||1000||860||√||√||37|
|6.76 PVB laminate||0.45m2||1000||860||√||√||36|
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- Maximum glazed area is measured per door leaf.
Circular Vision Panels
Standard Cross Section
Standard Vision Panel Cross Sections
Sidelights and Overlights
Sidelights and overlights are not an option on this door set as it would impact the acoustic performance of the door set.
Overpanels are not an option on this door set as it would impact the acoustic performance of the door set.
Additional Door Options
Push or Kickplates
Kickplates of any kind can be surface mounted to this door set.
Acoustical Performance Graphs
Acoustical performance graphs
This door leaf has a thermal insulation rating (R-value) of 0.751 Km2/W.
Technical Compliance Statement
Complete door sets are tested to ISO 140-3 in a purpose-built facility that meets the requirements of ISO 140-1.