Pacific F15 Door Set -/15/15sm Installation
This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.
Installation wall framing requirements
Pacific F15 Door Set -/15/15sm
WALL TYPE: Timber stud
FRAME TYPE: Timber
Frame materials available:
- Radiata pine or denser (standard thickness is 30mm)
Fasteners:
- Frame - Screwed (10g x 50mm self tapping) at 600mm centres and near hinges. Two screws per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Ex 75x50mm minimum
Wedging gap:
- 0-10mm
WALL TYPE: Timber stud
FRAME TYPE: Timber
Frame materials available:
- Radiata pine or denser (standard thickness is 30mm)
Fasteners:
- Frame - Screwed (10g x 50mm self tapping) at 600mm centres and near hinges. Two screws per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Ex 75x50mm minimum
Wedging gap:
- 0-10mm
WALL TYPE: Masonry
FRAME TYPE: Timber
Frame materials available:
- Radiata pine or denser (standard thickness is 30mm)
Fasteners:
- Frame - M8 or M10 'Ramset' Dynabolts at 600mm centres and near hinges. Fixings on or near centre of frame jamb.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave -nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - single central fastener required
Wedging gap:
- 0-10mm
WALL TYPE: Steel stud
FRAME TYPE: Timber
Frame materials available:
- Radiata pine or denser (standard thickness is 30mm)
Fasteners:
- Frame - Screwed (10g x 50mm self tapping) at 600mm centres and near hinges. Two screws per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Steel stud minimum 63mm, timber stud to match
Wedging gap:
- 0-10mm
WALL TYPE: Steel stud
FRAME TYPE: Timber
Frame materials available:
- Radiata pine or denser (standard thickness is 30mm)
Fasteners:
- Frame - Screwed (10g x 50mm self tapping) at 600mm centres and near hinges. Two screws per location.
- Stops - nailed (50 x 3.2mm) at 200mm centres.
- Architrave - nailed (50 x 3.2mm) at 400mm centres.
Head Fixing (minimum):
- Single door - none required
- Paired door - double central fastener required
Stud size:
- Steel stud minimum 63mm
Wedging gap:
- 0-10mm
