Pacific ARMASHIELD Blast Door Set


The Pacific Armashield Blast door set is an all-steel security door set, hung in a steel frame. The door set is designed for resistance to attack to the outside (hinge) face. Test results refer to a single leaf or pair hinged door set as noted. Hardware restrictions apply.

A fire-rated version of the Armashield is available. Please refer to the Armashield-FR datasheet.

For door sets fully tested for burglar resistance, fire resistance, bullet resistance and explosion resistance, refer to the Pacific Protector Series.

This door set is suitable for both interior and exterior use.

  Standard Rating Description Door application Orientation Hardware
Explosion resistance EN13124 EXR 4 12kg TNT at 4 metres Single Hinge face Mottura multi-point locking
Explosion resistance EN13124 EXR 3 12kg TNT at 5.5 metres Single Hinge face Mottura multi-point locking
Explosion resistance EN13124 EXR 2 3 kg TNT at 3 metres Single Hinge face Abloy EL560 single point locking
Explosion resistance EN13124 EXR 1 3 kg TNT at 5 metres Single or pair Both faces Mottura multi-point locking

Test results apply only to the specification and hardware described.

The thickness of the Armashield door leaf is 48mm (52mm for EXR 4 rating). Leaf weight is approximately 80kg/m2 (90kg/m2 for EXR 4).

Wall Type Fire Resistance Rating (FRR) Door Application Max Leaf
Height (mm)
Max Leaf
Width (mm)
Masonry Not applicable Single or pair 2700 1200


  1. Doors can be manufactured to any practical size to suit clients’ requirements.

Security Testing

Please talk to a Pacific Doors representative if you require a combination of security and blast resistance.

Ballistic Testing

A combination of explosive blast and ballistic resistance is available. Please see the Armashield Ballistic datasheet or talk to a Pacific Doors representative for more information.


Latching hardware selection is limited to what has been tested.


Surface-mounted closers mounted on the inside face are recommended.


Fully mortised 4½ x 4½ Stainless steel Institutional hinges are standard on the hinged Armashield door set.


Product Options


Leaf Facings

ll steel leaf with attack face in 6mm steel or 10mm hardened steel (EXR 4). Non attack (inside) face is a removable light gauge steel panel.

Leaf Edges

The Armashield Blast has leaf edges edges as shown below.

Frame Types & Profiles

Timber Frame

This door set is only available in a steel frame.

Steel Frame

The steel frame profiles listed below are available for the Armashield Blast door set


For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles


Wall Types

This door set is tested in masonry walls only.

Product Optional Extras

Vision Panels

Vision panels are not tested in this doorset.

If you require a vision panel in your doorset this can be accommodated but the resulting product will not be certified.


Overpanels are not applicable for this door set.

Additional Door Options

Push or Kickplates

Kickplates are not generally required on this door set.


Ventilation Grilles

Ventilation grilles are not applicable for this door set.


Power Transfer Devices

Fully mortised devices, which fully conceal cables, are recommended (such as Von Duprin EPT). Hinges with integral wiring are also available.

Thermal Insulation

This door leaf has a thermal insulation rating (R-value) of 0.029 Km2/W.

Technical Compliance Statement

Explosive testing was monitored by OPUS Central Laboratories and is documented in their reports “07-529i05: Compliance Appraisal of Four Pacific Door Systems Ltd Doors to Explosion Resistance Standard EN 13124-2:2004” and "5-20076.00: Compliance Appraisal of Three Pacific Door Systems Ltd Doors to Explosion Resistance Standard EN 13124-2:2004”.