Pacific SPS4 Hinged Door Set

 

The Pacific SPS4 Institutional Interior Door is a robust, economical utility door. The SPS4 door leaf is solid core, faced in steel sheet, and capped two edges with steel channel. The door is typically hung in a steel frame.

Most common applications include:

  • Protection of staff or property
  • Commercial environments

The door set is suitable for interior use only.

The thickness of the SPS4 door leaf is 50mm with an approximate leaf weight of 45kg/m2

Wall Type Fire Resistance Rating (FRR) Door Application Max Leaf
Height (mm)		 Max Leaf
Width (mm)
Timber Stud
Masonry		 Not applicable Single 2400 1200
Pair 2400 1200

Notes:

  1. Please note that the maximum leaf width shown above is measured per door leaf.
  2. Doors can be manufactured to any practical size, please contact Pacific Doors.

Hardware

Hinges

Stainless steel button tipped Ball Bearing hinges 4 per leaf. Full mortise installation.

The SPS4 can also be installed on block hinges, for example as a cell door in a cast-in cell front.

Pacific Doors also has its own designed and tested block hinge avaiable on request.

Security Hardware

The SPS4 door set is suitable for the installation of any security or architectural hardware. Hardware must be specified at time of order to enable correct preparation.

Product Options

Leaf Facings

0.9mm electrogalvanised steel sheet is standard.

Leaf Edges

1.2mm steel edge cappings over the facing to two long edges. 

               

Frame Types & Profiles

Timber Frame

This door set is only available in a steel frame.

Steel Frame

The steel frame profiles listed below are available for the SPS4 door set

     

Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

 

Product Optional Extras

Vision Panels

Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead
Per VP Total Steel Bead
Security Glazing 0.8325m2 1.665m2 925 900 √

 

Vision panel beading consists of an all steel-welded frame to each side. ‘Threat’ side is non-removable. Glazing material includes a range of options depending on security level required.

 

Standard Vision Panel Cross Sections

Steel Bead

Sidelights and Overlights

Secure sidelights and overlights are available for this door set. Please contact Pacific Doors to discuss your project requirements.

Overpanels

Secure overpanels are available for this door set. Please contact Pacific Doors to discuss your project requirements.

Additional Door Options

Push or Kickplates

Kickplates are not generally required on this door set.

 

Ventilation Grilles

Optional, stainless steel mesh inserted into the door core and faced each side with louvre grilles (maximum 200x200mm). Not available for smoke control.

Thermal Insulation

This door leaf has a thermal insulation rating (R-value) of 0.502 Km2/W.

Building Product Information Statement