Pacific SPS2 Grille Door Set
The Pacific SPS2 Grille door set consists of an all-steel welded door leaf (single or pair) including steel plate or bar configurations, hung in a solid steel frame.
Most common applications include:
- Corridor or pass door
- Institutional gate
The door set is suitable for both interior and exterior use.
The thickness of the SPS2 door leaf has an approximate leaf weight of 45kg/m2
|Wall Type||Fire Resistance Rating (FRR)||Door Application||Max Leaf
- Please note that the maximum leaf width shown above is measured per door leaf.
4½“ x 4½” Stainless Steel Institutional Hinges. Surface mounting is standard with 3 hinges per leaf.
The SPS2 can also be installed on block hinges, for example as a cell door in a cast-in cell front.
Pacific Doors also has its own designed and tested block hinge avaiable on request.
Food pass or other openings may be included in the grille door.
Any institutional lockset may be surface mounted or fitted within the grille framework.
All steel welded leaf of steel bar and plate fabricated to clients’ requirements.
The SPS2 has a leaf edge as shown below.
Frame Types & Profiles
This door set is only available in a steel frame.
Rolled mild steel angle 100x75x6mm with stop 25mm. The door leaf may also be hung in a folded 2mm steel frame if required.
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
Pair door sets are available with the below meeting stiles.
Angle frame may be fixed via the reveal and /or the inner flange depending on the wall construction available.
Product Optional Extras
Not applicable to this door set.
Overpanels are not applicable for this doorset.
Additional Door Options
Push or Kickplates
Kickplates are not generally required on this door set.
Ventilation grilles are not applicable for this door set.