Pacific SPS1 Hinged Door Set

 

The Pacific SPS1 door set is a detention or commercial security door, resistant to physical attack using hand tools, levers and heavy impacts from either face. The SPS1 includes features designed to increase impact resistance and durability in high-use situations.

The door leaf is a solid core panel, fully encapsulated in steel sheet with seam-welded edges, hung in a steel frame.

A fire-rated version of the SPS1 is available. Refer to the separate datasheet for SPS1-FR.

Most common applications include:

  • Institutional Detention door set
  • Prison Cell Door
  • Commercial Security Fire door
  • Stairwell door in multi-level buildings

The door set is suitable for both interior and exterior use.

  Rating Standard Description
Bullet Resistance G1 AS/NZ 2343 .357 Magnum
S0 AS/NZ 2343 Shotgun 12 gauge SG shot

The thickness of the SPS1 door leaf is 50mm with an approximate leaf weight of 59kg/m2

Wall Type Fire Resistance Rating (FRR) Door Application Max Leaf
Height (mm)
Max Leaf
Width (mm)
Timber Stud
Masonry
Not applicable Single 2350 1150
Pair 2350 1150

Notes:

  1. Please note that the maximum leaf width shown above is measured per door leaf.

Security Testing

The SPS1 door set was subjected to 50 impacts from a 200kg cement-filled bag at 4.8m/s, in the direction of opening of the door. The door was able to be opened at the end of the test and was substantially undamaged.

Ballistic Testing

The SPS1-FR door set has been successfully tested to AS 2343:1984 “Bullet-resistant panels for interior use” with ratings of:

  • G1 .357 Magnum
  • S0 Shotgun 12 gauge SG shot

Hardware

Closer

Surface-mounted or concealed closers can be fitted to the SPS1. If concealed closers are required these must be specified at time of order so that correct preparations can be made in the door leaf and frame.

Hinges

Full mortise 4½” x 4½“ Institutional Hinges are standard (material is Stainless Steel 304).

The SPS1 can also be installed on block hinges, for example as a cell door in a cast-in cell front.

Pacific Doors also has its own designed and tested block hinge avaiable on request.

Locks and Accessories

Any security or commercial locks which suit the door thickness can be fitted to the SPS1 door set. The lock (and other hardware) must be specified at time of order so that correct preparations can be made in the door leaf and frame.

The leaf is solid core and therefore most surface mounted or mortised devices can be connected to it such as:

  • Mortise, cylinder or surface mounted locks
  • Frame-mounted locks
  • Door position or lock status switches
  • Flush or surface mounted handles
  • Power cable ducts

A wide range of electronic locks may be accommodated including electromagnet clamps, shearlocks, and electric strikes.

Locking systems with multiple bolts including top and bottom bolts, internally fitted to the SPS1 door set, are available from Pacific Door Systems.

Product Options

Leaf Facings

The SPS1 is fully encapsulated in steel sheet.

Leaf Edges

The SPS1 has seam welded edges as shown below.

Frame Types & Profiles

Timber Frame

This door set is only available in a steel frame.

Steel Frame

The steel frame profiles listed below are available for the SPS1 door set

   

For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

Wall Types

This door set is suitable for installation into a timber or masonry wall of equal security construction as the door type.

Timber stud walls

A timber stud subframe can be factory fitted to the main frame for connection to a timber stud security wall.

Masonry walls

Frames may be installed during or after construction of masonry walls. Several proven connection systems are available.

Steel stud wall

It is recommended to trim out the door opening in a steel stud wall with double timber studs to full height.

Product Optional Extras

Vision Panels

Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead
Per VP Total Steel Bead
Security Glazing 0.765m2 1.53m2 900 850

Note:

  1. VP = Vision Panel
  2. Glazing can be of your choice.

The standard glazing system provides a flush attack face and steel beading with fixings on the “non-attack” face. Glazing with ballistic rating G1 is available. Details are available from Pacific Doors.

Standard Vision Panel Cross Sections

Steel Bead

Sidelights and Overlights

Secure sidelights and overlights are available for this door set. Please contact PDS to discuss your project requirements.

Overpanels

Secure overpanels are available for this door set. Please contact PDS to discuss your project requirements.

Additional Door Options

Push or Kickplates

Kickplates are not generally required on this door set.

 

Ventilation Grilles

Optional, stainless steel mesh inserted into the door core and faced each side with louvre grilles (maximum 200x200mm). Not available for smoke control or bullet-resistant SPS1.

 

Food Hatches

A hinged, latching food hatch may be fitted to suit clients' requirements.

 

 

Power Transfer Devices

Fully mortised devices, which fully conceal cables, are recommended (such as Von Duprin EPT). Hinges with integral wiring are also available.

Thermal Insulation

This door leaf has a thermal insulation rating (R-value) of 0.615 Km2/W.

Technical Compliance Statement

Security testing was conducted by Opus Central Laboratories Report 98-527903.66 "Intruder Resistance Tests on Three door sets from Pacific Door Systems Ltd".

Opus Central Laboratories Report 01-525488.00: The SPS1 door set was tested to the requirements of ASTM F 1450-97 including:

-        Door Static Load Test
-        Door Rack Test
-        Door Edge Crush Test
-        Door Assembly Impact Test

The impact testing is conducted on two specimens, one with frame-mounted lock and the other with door-mounted lock. The tested door sets included polycarbonate glazing to the vision panel.

The tested SPS1 door set met the requirements of the relevant clauses of ASTM F 1450-97 to all levels 4 to 1.

The SPS1 door set has been successfully tested to AS 2343:1984 “Bullet-resistant panels for interior use” with ratings of:

  • G1 .357 Magnum
  • S0 Shotgun 12 gauge SG shot