Pacific PFW30 Fuego-Light Steel Fire Window -/30/30
The Pacific Forster FuegoLight -/30/30 is a fixed glazing, steel framed fire rated window. It provides 30 minutes of integrity and 30 minutes of insulation.
The thickness of the window frame is 65 mm with an approximate glazed weight of 78 kg/m2
This is a double glazed window especially suited to exterior applications where increased thermal insulation is required.
| Glazing Type | Maximum Glazed Area | Max Height (mm) | Max Width (mm) | Frame Type | Fire Rating | |
| Timber | Steel | |||||
| Pyrobel 16 DGU | 3.33 m2 | 1376 | 2811 | √ | -/30/30 | |
Notes:
- Sizes noted above are the clear view.
- Sizes over 1.6 m2 may require additional resources on site for installation
- Glazing is Grade A safety glass
Product Options
Sizing Rules
The maximum allowed clear view is 1376 mm High x 2811 mm Wide. Two vertical lights can be used in a single frame by the inclusion of a transom at mid-height. Maximum allowed total frame height is 2982 mm.
ACoustic Performance
This window has not been acoustic tested.
Finish
Standard preparation for interior use is powder coating.
Standard preparation for exterior use is sandblasting followed by zinc arc spray (15 year weatherability grade) to frame.
Unit can be delivered with a powder coat finish or primed ready to paint.
Exterior Situations
The window is tested to AS/NZS 4284:2008 – “Testing of building facades” and complies with requirements of NZS 4211:2008 – “Specification for performance of windows” up to and including the Extra High Wind Zone.
Frame Types & Profiles
Steel Frame
The frame is made from 1.5 mm cold formed steel box sections packed with a ceramic fibre board.
Wall Types
The Pacific PFW30 is suitable for installation in timber or steel stud plasterboard walls and masonry fire rated walls. Walls to be fire rated to minimum -/30/30 by others.
The standard installation method for steel or timber stud walls is by 12g screws at max. 450 mm centres.
The standard for Masonry installation is M8 Excalibur screwbolts (or similar) at max. 450 mm centres. No fasteners are exposed to weather or exterior face.
Thermal Insulation
The glazing used in this window has a thermal insulation rating (R-value) of 0.37 Km2/W
Changes to the NZBC H1 “Energy efficiency” will come into effect gradually starting from November 2022, featuring more stringent requirements for the thermal insulation values of all exterior glazed windows and doors. As a result, some of our products may not be suitable for all climate zones or building types. Customers should take care to specify a suitable product for each specific project and Pacific Doors take no responsibility for incorrect products being selected. Thermal insulation R-values for all our exterior glazing products are listed on the Pacific Doors website.
Building Product Information Statement
