Pacific VP120-AP Access Panel -/120/120
The Pacific VP120-AP Access Panel is a fire rated wall panel screw-fixed to a steel frame. Access panels are outside the scope of NZS 4520 and are therefore not labelled.
|Wall Type||Fire Resistance Rating
|Panel thickness (mm)||Max Panel Height (mm)||Max Panel Width (mm)|
|Steel Stud Wall
Timber Stud Wall
The leaf edges listed below are available for this panel.
Frame Types & Profiles
The VP120-Ap Access Panel is not available in a timber frame.
The steel frame profiles listed below are available for this panel.
Any masonry, concrete or Gib® fire rated system of FRR at least -/120/120.
A reed switch could be fitted to the assembly to monitor closed status.
Tamper resistant fasteners requiring special tools for removal may be fitted.
Recessed or surface mounted pull handles may be factory fitted.
Technical Compliance Statement
Both systems have been tested by Building Research Association of New Zealand (BRANZ) to AS1530.4.
Smoke seals are required, or else a maximum 2mm gap between panel and frame.