Pacific VP30HR Hinged Door Set -/30/30sm Installation

 

This tool is designed to filter the available results as you search. Once you have applied a filter, you may need to reset the filter to be able to see all other available options.

To see our installation videos please click here.

Installation wall framing requirements

Pacific VP30HR Hinged Door Set -/30/30sm

WALL TYPE: Timber stud
FRAME TYPE: Timber

Frame materials available:

  • Radiata pine or denser (minimum thickness is 30mm)

Fasteners:

  • Frame - Either nailed (75 x 3.2mm) or screwed (10g x 75mm) at 600mm centres. Two fixings per location.
  • Stops - nailed (50 x 3.2mm) at 200mm centres.
  • Architrave - nailed (50 x 3.2mm) at 400mm centres.

Head Fixing (minimum):

  • Single door - none required
  • Paired door - double central fastener required

Stud size:

  • Ex 75 x 50 minimum.

Wedging gap:

  • 0-15mm
F-D-VP30-T-T-3 image
WALL TYPE: Timber stud
FRAME TYPE: Timber

Frame materials available:

  • Radiata pine or denser, (minimum thickness is 42mm)

Fasteners:

  • Frame - Either nailed (75 x 3.2mm) or screwed (10g x 75mm) at 600mm centres nominal. Two fixings per location.
  • Stops - nailed (50 x 3.2mm) at 200mm centres.
  • Architrave - nailed (50 x 3.2mm) at 400mm centres.
  • Pryda Jamb-fixa brackets Type JFB100 at 500mm centres may be used to fix profiles A & B to approved walls.

Stud size:

  • Ex 75x50 minimum.

Wedging gap:

  • 0-10mm
F-D-VP30-T-T-4 image
WALL TYPE: Steel stud
FRAME TYPE: Timber

Frame materials available:

  • Radiata pine or denser (minimum thickness is 30mm)

Fasteners:

  • Frame - Screwed (10g x 50mm self tapping) at 600mm centres nominal. Minimum of one screw per location. Frames may also be installed by screw fixing the steel studs to the back of the timber frame during wall construction.
  • Stops - nailed (50 x 3.2mm) at 200mm centres.
  • Architrave - nailed (50 x 3.2mm) at 400mm centres.

Head Fixing (minimum):

  • Single door - none required
  • Paired door - double central fastener required

Stud size:

  • 65 x 34mm minimum of 0.55 MSG gauge.

Wedging gap:

  • 0-10mm
F-D-VP30-T-S-3 image