Pacific F0.5 Door Set -/30/30sm

 

**The F0.5 door type is obsolete and is no longer being offered as of July 2023. Please see the VP30A datasheet for an alternative door type**

 

The Pacific F0.5 is a side hung fire door set. The door set configuration may be single leaf or pair, finished with a variety of facings and hung in a timber or steel frame.

Timber-framed smoke control doors include a seal in the frame. Steel framed doors include a seal in the leaf or the PFS-3 frame seal. If required, bottom seals can be selected from the Hardware list.

The thickness of the F0.5 door leaf is 45mm with an approximate leaf weight of 27kg/m2

 Wall Type Fire Resistance Rating
Stability/Integrity/Insulation
Door Application Max Leaf
Height (mm)
Max Leaf
Width (mm)
Steel Stud Wall
Timber Stud Wall
Masonry Wall
-/30/30sm Single 2250 1020
Pair 2250 810
Pair 2100 910
Pair 2030 1020

Notes:

  1. Please note that the maximum leaf width shown above is measured per door leaf.
  2. Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.
  3. The ‘sm’ above denotes that the door is available as a smoke control door set.
  4. Insulation ratings must be notified at time of pricing for steel frames.

Product Options

Leaf Facings

  • MDF
  • Hardboard
  • Plywood
  • Oil Tempered Hardboard 
  • Solid Timber (thickness up to 12mm, Rimu or denser)
  • Timber Veneers
  • High Pressure Laminate
  • Sheet Vinyl
  • Timber mouldings

Notes:

  1. Of the above facings only those marked * may extend around the door edge.
  2. Steel frames are required where metal capping is used.
  3. Timber veneer requires FRR -/30/30 and is only available in timber frame or packed steel frame
  4. Standard Paint Quality doors are allowed ‘non-clashed’ to provide best surface for finish painting.
  5. Other facings may be available, please contact Pacific Doors to discuss further options.

Leaf Edges

Paint quality doors have unclashed edges.

Timber veneer faced doors are clashed on the vertical edges with solid timber.

 

Frame Types & Profiles

Timber Frame

The timber frame profiles listed below are available for the F0.5 door set.

The timber species of the frame must be pine or denser (500kg/m3)

   

Steel Frame

The timber frame profiles listed below are available for the F0.5 door set. 

The F0.5 door set is available in the two-part steel frame system for fixing to walls already lined.

Notes:

  1. D2 requires minimum 110 mm wall thickness

For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

The meeting stiles listed below are applicable to paired door sets only.

ACOUSTICAL PERFORMANCE

An acoustic rating of STC 30 (Rw 30) is available for this door. Pair doorsets are not acoustic tested.

If an acoustic rating is required this has to be specified at time of order and will come with restrictions around seals. Vision panels are not acoustic tested. Please contact Pacific Doors if more information is required.

Wall Types

Timber Frames may be connected to timber stud, steel stud or concrete/masonry. Steel frames may be connected to timber stud and masonry (not steel stud). The minimum specification for each wall type is:

  1. Precast concrete (100mm thickness) or grouted blockwork (190mm thickness).
  2. Timber framing, minimum ex 75x50, with minimum lining thickness of 10mm Fyreline Gib Board® each side in accordance with Winstone Wallboards’ GBT30.
  3. Steel stud framing lined with Gib Board® in accordance with Winstone Wallboards’ GBS30 or higher, where the opening for the door is framed out with full height timber stud and a timber lintel.
  4. Universal Wall systems GBUW30a or GBUW30b
  5. Installation in wall types outside the scope of (1), (2) and (3) above is possible provided the doorset is built into a wall of minimum specification (1), (2) or (3) extending a minimum of 300mm each side of the frame and to a full height of stud. This wall segment may then be abutted and joined to the non-complying wall.

Product Optional Extras

Vision Panels

Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR with Vision Panel
Timber Aluminum Up to 0.065m2 Over 0.065m2
Pyrobel* 1.0m2 945 625 -/30/30 -/30/30
Georgian Wired 1.0m2 945 625 -/30/30 -/30/-
Firelite 1.0m2 945 625 -/30/30 -/30/-
Robax 1.0m2 945 625 -/30/30 -/30/-
Pyran* 1.0m2 945 625 -/30/30 -/30/-

Notes:

  1. Please note that the height and width of the vision panel must still fall within the maximum glazed area.
  2. Glazing types marked with * indicate Grade A Safety glass.

For 30 minute door sets with larger vision panel options, please refer to the VP30HR or VP60-P

Circular Vision Panels

Standard Vision Panel Cross Sections

Timber Bead

Aluminium Bead

Sidelights and Overlights

Single Leaf Door Sets

Pair Leaf Door Sets

Overpanels

A transom overpanel of 605mm maximum height is available.

   Single Door Set                                                Pair Door Set

 Overpanel Cross Section

A fixed side panel is permitted adjacent to single or pair leaf doors separated by a timber mullion.

Additional Door Options

Push or Kickplates

Stainless Steel surface-mounted, screw-fixed, to a maximum height of 600mm.
 

Ventilation Grilles

Please note that fire doors with ventilation grilles cannot be certified as ‘Smoke’ control door sets.

An Intumescent grille is available to a maximum size of 300 x 300mm. Ventilation grilles are not suitable for exterior quality F0.5 doors.
 

 

Interconnecting Doors

An interconnecting door set is available, with two single leaf doors in series in a common frame. This door will have a fire rating of (-/60/60sm). Acoustic seals can be fitted to the door set as per items listed in the Hardware List.

V-GROOVES

V-grooves can be machined into the leaf facings for aesthetic purposes.

The following restrictions apply:

  • Only available in timber framed doorsets
  • Leaf facing has to be MDF or ply
  • Facing thickness is increased to 6 mm

       

Thermal Insulation

This door leaf has a thermal insulation rating (R-value) of 0.48 Km2/W.

Acoustical performance graphs

 

 

 

Technical Compliance Statement

The F0.5 fire door complies with the requirements of NZS 4520 Fire-resistant door sets when installed in accordance with Pacific Doors’ Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.

NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)

Pacific F0.5 fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.

The fire resistance achieved by the F0.5 was FRR -/30/30

The F0.5 fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Pacific Doors, or specific contractual guarantees, whichever are overriding.

This door is not tested for water ingress in exterior installations. We make no statement as to its suitability under NZBC E2 External moisture. All exterior doors should be given as much shelter as possible and be fitted with appropriate flashing systems.