Pacific SPA29-P Fire Acoustic Door Set -/60/60sm
The SP-A29-P is a tested Acoustic pair door set which also complies with NZS 4520 Fire-resistant door sets, as referenced in the New Zealand Building Code (NZBC Appendix C 6.1.1).
- STC rating 29
- Fire Rating -/30/30sm or -/60/60sm.
The door set configuration is a pair of flush panel door leaves hung in a steel frame. It includes frame-mounted perimeter seals and a compression seal & threshold plate at the sill.
The thickness of the SPA29-P door leaf is 48mm with an approximate leaf weight of 28kg/m2
|Wall Type||Fire Resistance Rating
|STC/Rw Rating||Door Application||Max Leaf
|Steel Stud Wall
Timber Stud Wall
- Please note that the maximum leaf width shown above is measured per door leaf.
- The ‘sm’ above denotes that the door is available as a smoke control door set.
Adjustable seals, screw-fixed to frame.
RP38 seal rebated to leaf and closing onto a steel threshold (Type E).
The facings listed below are available for the SPA29-P door set
- Oil Tempered Hardboard
- Timber Veneers *
- Fire Rated Formica
- High pressure laminate up to 1.5mm thick (e.g. Laminex, Formica)
- Decorative timber mouldings/panels
- Aluminium sheet (0.3 – 1mm)
- Acrylic - vinyl sheets up to 1.5mm thick (e.g. Acrovyn, Korogard)
- Sheet Vinyl (1.25 – 2mm)
- Metal Sheet, mild or stainless (0.6 – 1.0mm) *
- Laminex Decoral
- Of the above facings only those marked * may extend around the door edge.
- Steel frames are required where metal capping is used.
- Standard Paint Quality doors are allowed ‘non-clashed’ to provide best surface for finish painting.
- Please note: SP-A29-P doors may have a visible ripple in the facings when painted. This is due to the method of construction of the acoustic door and cannot be altered.
- Other facings may be available, please contact Pacific Doors to discuss further options.
Paint-quality doors have unclashed edges.
Timber veneer faced doors are clashed on the vertical edges with solid timber.
Frame Types & Profiles
This door set is only available in a steel frame. Refer to the AFD300 for a timber frame acoustic fire door set.
The steel frame profiles listed below are available for the SPA29-P door set
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
The meeting stiles listed below are available for the SPA29-P door set
Jambs may be connected to timber stud, steel stud or concrete masonry. The minimum specification for each wall type is:
- Precast concrete (100mm thickness) or grouted blockwork (190mm thickness).
- Non-load bearing timber stud partitions of minimum specifications GBT60a or GBT60b. Note that steel framed VP60 door sets may only be installed in walls of minimum stud size ex 100x50mm (Gib® Fire Rated Systems).
- Non-load bearing steel stud partitions of minimum specification GBS90 (timber framed doors) or GBS60 (Steel framed doors) (Gib® Fire Rated Systems).
- Universal Wall systems GBUW60a or GBUW60b
Product Optional Extras
|Glazing Type||Maximum Glazed Area||Max Height (mm)||Max Width (mm)||Glazing Bead||FRR with Vision Panel|
|Timber||Aluminum||Up to 0.065m2||Over 0.065m2|
|Georgian Wired||8% of leaf||850||300||√||-/60/60||-/60/-|
|Firelite||8% of leaf||850||300||√||-/60/60||-/60/-|
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- The vision panel can be up to 8% of the area of the door leaf.
- Glazing types marked with * indicate Grade A Safety glass.
Sidelights and Overlights
Sidelights and overlights are not an option on this door set as it would impact the acoustic performance of the door set.
Overpanels are not an option on this door set as it would impact the acoustic performance of the door set.
Additional Door Options
Push or Kickplates
Kickplates of any kind can be surface mounted to this door set.
Ventilation Grilles are not an option on this door set as it would impact the acoustic performance of the door set.
V-grooves are not an option on this doorset.
This door leaf has a thermal insulation rating (R-value) of 0.645 Km2/W.
Technical Compliance Statement
The SPA29-P fire door complies with the requirements of NZS 4520 Fire-resistant door sets when installed in accordance with Pacific Doors’ Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.
NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)
SPA29-P fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.
The fire resistance achieved by the SPA29-P was FRR -/60/60
The SPA29-P has been tested to and met the physical endurance requirements of NZS 4520 Appendix A.
The SPA29-P fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Pacific Doors, or specific contractual guarantees, whichever are overriding.
Complete door sets are tested to ISO 140-3 in a purpose-built facility that meets the requirements of ISO 140-1.