PACIFIC FS60 Cavity Sliding Door Set -/60/30
The Pacific Cavity Slider is a tested fire rated single doorset which complies with NZS 4520 Fire-resistant doorsets, as referenced in the New Zealand Building Code (NZBC Appendix C 6.1.1).
• Fire Rating -/60/30 sm
The doorset configuration is a single door leaf hung in a steel frame. It includes frame-mounted perimeter seals and intumescent seals at the sill.
A counterweight system, released by an electromagnetic hold open device that is linked to a fire detection system, closes the door leaf in the event of a fire.
The thickness of the Cavity Slider door leaf is 40 – 44 mm (depending on facings) with an approximate leaf weight of 46 kg/m2 (steel faces) or 38 kg/m2 (timber faces).
|Wall Type||Jamb Type||Maximum Fire Resistance Rating
|Door Application||Max Clear Opening
|Max Clear Opening
- Maximum clear opening width is reduced by 260mm if face mounted hardware is required.
- The 'sm' above denotes that the door is available as a smoke control door set if required (not the default).
- The door set needs to be connected to a fire detection system for the fire rating to be valid.
- Other facings may be available, please contact Pacific Doors to discuss further options.
The door leaf is capped on the strike edge with a folded steel capping.
Frame Types & Profiles
Timber frames are not available for this door set.
The steel frame profiles listed below are available for the FS60 door set.
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
This door set is not available in a pair configuration.
Jambs may be connected to timber stud or steel stud plasterboard walls having a FRR of at least -/60/60 in accordance with AS 1530.4:2014.
Minimum stud depth is 90 mm.
Product Optional Extras
|Glazing Type||Maximum Glazed Area||Max Height (mm)||Max Width (mm)||Glazing Bead||FRR with Vision Panel|
|Timber||Aluminum||Up to 0.065m2||Over 0.065m2|
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- Glazing types marked with * indicate Grade A Safety glass.
Circular Vision Panels
Circular vision panels are not an option on this door set.
Standard Vision Panel
Sidelights and Overlights
Sidelights and Overlights
Sidelight and overlights are not an option on this door set.
Overpanels are not an option on this door set.
The following hardware is certified for use on the fire rated cavity slider:
|Slider track||Brio Single Run 100 A20|
|Slider hangers||Brio Single Run 100 57DN|
|Soft close||Brio Single Run 100 SCT|
|Floor guide||Brio Single Run 100 106SSMF|
|Pull handles||Kaba FP102 flush pull|
|Pull handles||Sopersmac S85 offset grip handles, through fixed|
|Edge pull||Windsor Brass 5267|
|Edge pull||Windsor Brass 5329|
Additional Door Options
Push or Kickplates
Kickplates can be of the below permitted materials and must be recessed flush. Fixing may be via screws or contact adhesive only.
- Steel (mild or Stainless)
Ventillation grilles are not an option
This door leaf has a thermal insulation rating (R-value) of 0.596 Km2/W.
Technical Compliance Statement
The Cavity Slider fire door complies with the requirements of NZS 4520 Fire-resistant doorsets when installed in accordance with Pacific Doors’ Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.
NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)
Pacific Cavity Slider fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.
The fire resistance achieved by the Pacific Cavity Slider was FRR -/60/30
The Cavity Slider has been tested to and met the physical endurance requirements of NZS 4520 Appendix A.
The Cavity Slider fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Pacific Doors, or specific contractual guarantees, whichever are overriding.