Pacific PFP60 Presto Steel Glazed Fire Door Set -/60/-sm


The Pacific Forster Presto -/60/- is a high visibility fully glazed fire door set. It comprises a side hung, fully glazed single or pair leaf. The leaf is hung on seam welded steel hinges in a steel frame.

The thickness of the door leaf is 50 mm with an approximate leaf weight of 58 kg/m2

 Wall Type Fire Resistance Rating
Door Application Max Leaf
Height (mm)
Max Leaf
Width (mm)
 Steel Stud Wall
Timber Stud Wall
Masonry Wall
 -/60/- sm Single 2426 976
Pair 2426 976


  1. Please note that the maximum leaf width shown above is measured per door leaf.
  2. The ‘sm’ above denotes that the door is available as a smoke control doorset.

Product Options

Leaf Facings

This steel fire door set is fully glazed and not available with any other facings.


Standard preparation for interior use is powder coating.

Standard preparation for exterior use is sandblasting followed by zinc arc spray (15 year weatherability grade) to leaf and frame.

Unit can be delivered with a powder coat finish or primed ready to paint.

Exterior Situations

The door set is tested to AS/NZS 4284:2008 – “Testing of building facades” and complies with requirements of NZS 4211:2008 – “Specification for performance of windows” up to and including the High Wind Zone.


Locks & Handles

This door set uses standard Forster lock and handles only.

The Forster lock fits any standard europrofile lock cylinder and comes in two versions; regular and panic exit.

No other latching hardware is approved on this door set.


Dorma TS93B SG5-7 closer mounted on either face.

For pair door sets closers have to be mounted on the pull side of the leaves.


The leaf is hung on two seam welded steel hinges.

Access control

The Effeff 143 (fail secure) electric strike is approved for use on this door.

Frame Types & Profiles

Steel Frame

The leaf is hung in a frame of 1.5 mm cold formed steel box sections.

For more in depth information on frame profiles and sizes, please see our Installation Instructions.

Meeting Stiles

This door set is available with rebated meeting stiles only. This is only applicable to pair door sets.

Wall Types

The Pacific steel fire doorset -/60/- is suitable for installation in timber stud, steel stud and masonry fire rated walls.

The standard installation method for steel or timber stud walls is by 12g screws at max. 450 mm centres.

The standard for Masonry installation is M8 Excalibur screwbolts (or similar) at max. 450 mm centres. No fasteners are exposed to weather or attack face.

Product Optional Extras

Vision Panels

Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR
Steel Aluminum
Pyrobel 16 1.894 m2 2266 836   -/60/-
Pyran S 1.894 m2 2266 836   -/60/-


  1. Sizes noted above are the clear view.
  2. All glazing is Grade A safety glass

Sidelights and Overlights

Sidelights with a clear view width of up to 1376 mm can be added to either side of the leaf. Multiple sidelights can be stacked horizontally with no limit to overall width.

A limited overlight can be added.

Glazing Type Maximum Glazed Area Max height for Sidelight (mm) Max height for Overlight (mm) Max Width (mm) Frame Type Fire Rating
Timber Steel
Pyran S, 6 mm 2.56 m2 2176 1376 1176   -/60/-
Pyrobel 16 3.68 m2 2676 266 (interior) 1376   -/60/-
216 (exterior)


  1. Sizes noted above are the clear view.



Additional Door Options

Push or Kickplates

Push or Kickplates are not available on this door set.


Ventilation Grilles

Ventilation grilles are not available on this door set.

Technical Compliance Statement

The Pacific Forster Presto -/60/- fire door complies with the requirements of NZS 4520 Fire-resistant door sets when installed in accordance with Pacific Doors’ Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.

NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)

Pacific Forster Presto -/60/-  fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.

The fire resistance achieved by the Pacific Forster Presto -/60/-  was FRR -/60/-

The Pacific Forster Presto -/60/-  has been tested to and met the physical endurance requirements of NZS 4520 Appendix A.

Pacific Door Systems Ltd Steel Door System is tested in accordance with AS/NZS4284:2008 "Testing of building facades". It complies with the requirements of NZ4211:2008 "Specification for performance of windows" up to and including the High Wind Zone as given by NZS3604:2011

The Pacific Forster Presto -/60/-  fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Pacific Doors, or specific contractual guarantees, whichever are overriding.